Roland MV-8000 - EFFECT LIBRARY Popup (Mfx;Dlycho;Reverb)

374
EFFECTS
EFFECT LIBRARY popup (MFX/DlyCho/Reverb)
Here you can save and recall effect settings.
To access this screen
• ➜ (select the current effect) ➜
The effect screen that appears will depend on the
current effect at which the cursor is located in the
EFFECTS screen (p. 372).
Explanation of each area
1. No. (effect library number)
The effect library consists of a Preset area containing
factory-set settings and a User area for you to
store/recall your own settings.
The Preset area is read-only; you cannot write
settings into the Preset area.
2. Name
Displays the name of the effect settings.
3. Algorithm
Displays the currently used effect algorithm.
4. Scroll bar
Indicates the approximate portion of the list that is
visible.
5. Library Preview
This will indicate “On” while you are previewing the
effect.
F-buttons
Write Here
Saves the current effect settings to the cursor location
within the library list.
Press [F5 (Yes)] to save, or press [F1 (No)] to cancel
without saving.
Preview
Temporarily enables the effect selected by the cursor,
letting you preview the result. The display will
indicate “Library Preview On” while you are
previewing the effect.
Use This
Specifies the effect setting parameters selected by the
cursor as the current effect.
To discard the selection you made in the popup and
return to the previous screen, press [EXIT].
Effect
U (User) area P (Preset) area
MFX
U001~U100 P001~P024
Dly/Cho U001~U050 P001~P002
Reverb U001~U050 P001~P004
ECS05_manual_e.book 374 ページ ２００５年１１月３０日 水曜日 午前１１時１４分