Roland MV-8800 - Page 26

Effect Block
A-26
MV-8800 Appendices
High Damp Gain
Value: -36–0 dB
Sets the degree of the High Damp.
• You can combine Low Damp and High Damp to elicit
qualities such as the room’s wall material (and sound
absorbency thereof).
Feedback
Value: 0–100
Sets the repeat times for the delay sound. When set to 0,
each delayed sound is played only once.
• Increasing the value too highly may cause oscillation
in the sound.
Direct Level
Value: 0–100
Sets the volume of the source sound.
MV-8800_a_e.book 26 ページ ２００６年１１月１０日 金曜日 午前１０時１９分