Roland RD-500 - Tone Shaping Parameters

@ Tone Setting
The RD-500 allows you to set the attack time, release time, and brightness of the sounds in each Tone
Group.
* If you select a different Tone in the same Tone Group, the edited settings will be erased.
* The sound of the Rhythm Set in PERCUSSION Tone Group cannot be edited.
EQUAUZER =) LAYER SPLIT. GRAND\ GRANO'2 E.GRAND © MK6-20
SSS oa
FH GG] Sw came
Event: ue “SYNTH. STRANGE: BASS - PERCUSSION
. Select the Function mode.
- To edit the Tone assigned to the INT LOWER Part, press the LOWER button. To edit the
Tone assigned to the INT UPPER Part, press the UPPER button.
. Select the parameter to be edited.
Press the ATTACK, DECAY, RELEASE, BRIGHT or SENSITIVITY button (the corresponding indicator
will light).
. Change the values using the INC/DEC buttons, VALUE slider or Numerical Keys.
Parameters that can be selected with the ATTACK/DECAY/RELEASE
buttons:
@ Attack: O— 127
@ Decay: 0— 127
@ Release: 0— 127
Set the Attack Time, Decay Time or Release Time of the sound.
Volume
Time
Attack Decay Release
Parameter that can be selected with the BRIGHT button:
@ Brightness: 0— 127
Sets the brightness of the sound by changing the cutoff frequencies.
31