Roland RS-5 - Page 17

17
Getting Ready
Getting Ready
1
Press [EDIT], getting the indicator to light.
2
Use VALUE [-]/[+] to select “System Setup.”
3
Press [ENTER].
4
Press [5] a number of times to select “LCD Contrast.”
fig.Q-05
5
Press VALUE [-]/[+] to set the value (1–8).
6
Press [EDIT].
The [EDIT] indicator goes out, and you are returned to the previous screen.
If you hold down [SHIFT]
and press [5], you will
return to the previous item.
Easily Setting the LCD Contrast
If you hold down [SHIFT] while you press [PHRASE PREVIEW], you can
select the “LCD Contrast” screen directly. Make settings as explained in
steps 5–6 of the above procedure.
fig.Q-06