59
Using the Convenient Functions in Performances
Using the Convenient Functions in Performances
Easily Selecting Performances
1
Press one of the FAVORITE PERFORM BANK buttons [1]–[8],
causing the button’s indicator to light up.
The Performance registered to the button that is pressed is called up.
If the Performance is Not Saved
After selecting a Performance, if you change the Performance’s settings and
carry out Step 2 without saving these changes, the RS-5/9 jumps to the Save
screen.
fig.Q-72
The Performance is saved while the Performance group and number are
registered to the button at the same time.
3. Press the numeric keys ([1]–[0]) to specify the Save destination number
(1–128).
4. Press [ENTER] to confirm the number.
5. Press [ENTER] once more to execute the save.
The Performance is saved, and “Completed” appears in the display.
The Performance is saved while the Performance group and number are
registered to the button at the same time.
If you make a mistake,
press [EXIT] and specify
the number once again.
Instead of using Steps 3
and 4, you can also specify
the number by pressing
VALUE [-]/[+].
To cancel a save or
registration in progress,
press [EXIT].
1
To Next Page
Loading...
