65
Chapter 1. An overview of the RS-5/9
Chapter 1
Convenient shortcuts
The RS-5/9 provides several convenient shortcuts.
* [**] + [##] means that you should hold down [**] and press
[##].
Setting the Split Point (p. 40)
[SPLIT]+[EDIT]
The display will show the Split Point setting page.
[SPLIT] + VALUE [-]/[+]
The split point can be set. When you release [SPLIT], the
previous display will reappear.
Setting the Arpeggio (p. 77)
[ARPEGGIO ON/OFF]+[EDIT]
The display will show the Arpeggio Style setting page.
[ARPEGGIO ON/OFF] + VALUE [-]/[+]
The arpeggio style can be set. When you release
[ARPEGGIO ON/OFF], the previous display will reappear.
Setting the Transpose (p. 48)
[TRANSPOSE ON/OFF]+[EDIT]
The display will show the Transpose setting page.
[TRANSPOSE ON/OFF] + VALUE [-]/[+]
The transpose can be set. When you release
[TRANSPOSE ON/OFF], the previous display will reappear.
Setting the LCD Contrast (p. 16)
[SHIFT]+[PHRASE PREVIEW]
The display will show the LCD Contrast setting page.
If “Stuck” Notes Occur
(PANIC)
If some operation causes sounds from the RS-5/9, or sounds
from an external sound generator connected with a MIDI
cable to fail to stop playing, use the Panic function.
When Sounds From the RS-5/9
Do Not Stop Playing
1. Hold down [SHIFT] and press [PANIC].
Sounds from the RS-5/9 stop playing.
The display will indicate “Panic! Now Muting.” while
the Panic function is being executed. When this message
goes off, you can start playing.
fig.R01-06
What to Do When an External Sound
Generator Fails to Stop Sounding
1. Hold down [SHIFT] and press [PANIC] for more than a
second.
Send the MIDI messages All Sound Off, Reset All
Controllers, Hold1 (0), Hold2 (0), and Sostenuto (0) for
all MIDI channels (Parts).
The display will indicate “Panic! Now Transmitting.”
while the Panic function is being executed. When this
message goes off, you can start playing.
fig.R01-07
To Next Page
Loading...
