81
Chapter 6. Effect Settings
Chapter 6
6. Press [EDIT].
The [EDIT] indicator goes out, and you are returned to
the previous screen.
Select the Type and Set Each
Parameter
There are 42 types of multi-effects. You can select any one of
these. After selecting the Type, you can change the values for
each of the parameters.
* When Source is set to UPPER or LOWER, the Type and
parameter settings are used as the settings for the Tone or
Drum Set assigned to that Part. When Source is set to
PERFORMANCE, these settings apply to the Performance.
1. Press [EDIT], getting the indicator to light.
2. Use VALUE [-]/[+] to select “Tone/Drum/
PFMCommon.”
3. Press [ENTER].
4. Press the numeric key [6] several times to select the item
you wish to set.
fig.R06-03
* What is indicated in the upper-left part of the display will
change depending on the value of the Source setting.
* If you hold down [SHIFT] and press [6], you will return to the
previous item.
5. Use VALUE [-]/[+] to set the value.
* If you wish to make settings for other Parts, repeat steps 4–5.
6. Press [EDIT].
The [EDIT] indicator goes out, and you are returned to
the previous screen.
Type (Multi-Effects Type)
Selections are made from the following 42 different multi-
effects.
Additionally, parameters for each of the multi-effects types
can be found on the following pages.
Value:
00: THROUGH (p. 82)
01: STEREO EQ (p. 82)
02: OVERDRIVE (p. 83)
03: DISTORTION (p. 83)
04: PHASER (p. 84)
05: SPECTRUM (p. 84)
06: ENHANCER (p. 85)
07: AUTO WAH (p. 85)
08: ROTARY (p. 86)
09: COMPRESSOR (p. 87)
10: LIMITER (p. 87)
11: HEXA-CHORUS (p. 88)
12: TREMOLO CHORUS (p. 88)
13: SPACE-D (p. 89)
14: STEREO CHORUS (p. 89)
15: STEREO FLANGER (p. 90)
16: STEP FLANGER (p. 91)
17: STEREO DELAY (p. 92)
18: MODULATION DELAY (p. 93)
19: TRIPLE TAP DELAY (p. 94)
20: QUADRUPLE TAP DELAY (p. 95)
21: TIME CONTROL DELAY (p. 96)
22: 2VOICE PITCH SHIFTER (p. 96)
23: FBK PITCH SHIFTER (p. 97)
24: REVERB (p. 98)
25: GATED REVERB (p. 99)
26: OVERDRIVE → CHORUS (p. 99)
27: OVERDRIVE → FLANGER (p. 100)
28: OVERDRIVE → DELAY (p. 100)
29: DISTORTION → CHORUS (p. 101)
30: DISTORTION → FLANGER (p. 101)
31: DISTORTION → DELAY (p. 101)
32: ENHANCER → CHORUS (p. 102)
33: ENHANCER → FLANGER (p. 102)
34: ENHANCER → DELAY (p. 103)
35: CHORUS → DELAY (p. 103)
36: FLANGER → DELAY (p. 104)
37: CHORUS → FLANGER (p. 104)
38: CHORUS/DELAY (p. 105)
39: FLANGER/DELAY (p. 105)
40: CHORUS/FLANGER (p. 105)
41: LOFI (p. 106)
42: SLICER (p. 106)
* Values for parameters marked with #1 or #2 can be changed in
real time with the modulation lever or the knobs. For details,
refer to (p. 71).
To Next Page
Loading...
