Roland RS-9 - Selecting Tones and Drum Sets; Selecting Tones by Category (TONE CATEGORY)

37
Playing Two Tones on the Keyboard
Playing Two Tones on the Keyboard
Selecting Tones and Drum Sets
Use the following procedure to switch Tones when Key Mode is set to Split
or Dual.
Selecting Tones By Category (TONE CATEGORY)
fig.Q-35
1
Make sure that the [TONE CATEGORY] indicator is lit.
If the [TONE CATEGORY] indicator is not lit, press [TONE CATEGORY]
once more.
2
Press PART [ ]/[ ] to move the cursor to the Part whose
Tone or Drum Set you want to switch.
fig.Q-36exp
The above figure is an example where the Upper Part is selected.
3
Press the numeric keys ([1]–[0]) a number of times until you
can select the Category you want.
4
Press VALUE [-]/[+] to select a Tone or Drum Set in the
currently selected Category.
341
2
Lower Part
Upper Part
Current Part
With Drum Sets, Step 3 is
not required.