EasyManua.ls Logo

Roland RSS M-300 - Page 126

Roland RSS M-300
225 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
126
USB memory recorder
USB memory recorder
If more than one output-destination channel are exist, the
lowest number channel is shown.
The function buttons have the following operations:
By default, the input of the USB memory recorder are specified as
follows:
The RECORDER SOURCE SELECT popup is used to specify the
input.
1.
Access the RECORDER screen.
g.ScrRecorderPlay.eps
2.
Move the cursor to the L channel of the RECORDER
SOURCE SELECT popup button, and press [ENTER].
ig.ScrRcdrSrcSelectGuide.eps
The RECORDER SOURCE SELECT popup will appear.
Current source indication
This indicates the current input-source.
Input-source select buttons
Use these to select the input-source channel for the USB
memory recorder.
3.
Move the cursor to the channel that you want to use as
the input-source, and press [ENTER] to select it.
4.
Press [F8 (CLOSE)] to close the popup.
5.
Make settings for the R channel in the same way.
By default, the output of the USB memory recorder are specified
as follows:
The RECORDER DESTINATION SELECT popup is used to specify
the output.
1.
Access the RECORDER screen.
g.ScrRecorderPlay.eps
2.
Move the cursor to the L channel of the RECORDER
DESTINATION SELECT popup button, and press [ENTER].
[F1 ( )] Selects the previous WAV file.
Holding this down during playback rewinds
the WAV file being played.
[F2 ( )] Selects the next WAV file. Holding this down
during playback fast-forwards the WAV file
being played.
[F3 ( )] Plays the WAV file selected using the song list.
[F4 (REC)] Puts the USB memory recorder into recording
standby.
[F5 (NAME EDIT)] Accesses the NAME EDIT popup, where you can
edit the name of the WAV file (p. 127).
[F6 (DELETE SONG)] Deletes the WAV file that’s selected in the song
list (p. 127).
[F7 (PLAY MODE)] Cycles through the available playback modes.
[F8 (PEAK CLEAR)] Clears the level meter’s peak hold or over
indication.
Specifying the input-source for the USB
memory recorder
Input
Input-source
RECORDER IN L
MAIN L
RECORDER IN R MAIN R
Specifying the output-destination for the
USB memory recorder
Output Output-destination
RECORDER OUT L CH31
RECORDER OUT R CH32
2
1
1
2
M-300_e.book 126 ページ 2010年6月24日 木曜日 午後2時26分

Table of Contents

Related product manuals