Roland RSS M-300 - Page 87

87
AUX send/MTX send
AUX send/MTX send
If MTX is stereo-linked, the following parameters will be
shown for the odd-numbered MTX send:
fig.PopMtxSendField2Guide.eps
Pan slider
This adjusts the left/right panning of the signal send to the
stereo-linked MTX in a range of L63–R63.
The function buttons have the following operations:
[F3 (ALL ON)
Turns on all send switches for each send field.
[F4 (ALL OFF) Turns off all send switches for each send field.
[F5 (UNITY) Sets the send level to 0.0 dB for the send field at
the cursor location.
[F8 (CLOSE)] Closes the popup.
1
1
M-300_e.book 87 ページ ２０１０年６月２４日 木曜日 午後２時２６分