Roland SH-201 - Setting the SPLIT POINT

71
Parameter list
Parameter list
1
Hold down the CANCEL button and press the TAP button.
2
Hold down the DUAL/SPLIT button and press a key.
The pressed key will become the split point.
(Example)
3
Press the CANCEL button.
* For details on the split point, refer to p. 64
1
Hold down the CANCEL button and press the TAP button.
2
Hold down the UPPER or LOWER button and press a key (C2–C4).
3
Press the CANCEL button.
* For details on the pitch bend range, refer to p. 64
Setting the SPLIT POINT
Setting the PITCH BEND RANGE
UPPER ToneLOWER Tone
: Pressed Key
0 2 4 5 7 9 11 12 14 16 17 19 21 23 24
1 3
6 108
13 15
18 2220
(C2) (C4)
SH-201_r_e.book 71 ページ ２００６年４月２７日 木曜日 午前１１時２８分