PATTERN DELAY
172
Trm
ModWave
This sets how the panning changes.
If this is on, the tremolo synchronizes with the tempo.
Adjusts the rate of the tremolo.
Adjusts the depth of the tremolo.
2Tap PanDly (2Tap Pan Delay)
Delay sound is heard in the two locations you specify.
If this is ON, the delay synchronizes with the tempo.
Adjusts the time until the second delay sound is heard.
Feedback
Adjusts the proportion of the delay sound that is fed back into the effect. Negative (-) settings
will invert the phase.
HF Damp
200–8000 [Hz],
BYPASS (*1)
Adjusts the frequency above which sound fed back to the effect is filtered out. If you don’t want
to filter out any high frequencies, set this parameter to BYPASS.
Adjusts the pan position of Delay 1.
Adjusts the pan position of Delay 2.
Adjusts the volume of Delay 1.
Adjusts the volume of Delay 2.
3Tap PanDly (3Tap Pan Delay)
Delay sound is heard in the three locations you specify.
If this is ON, the delay synchronizes with the tempo.
Delay time of the third delay sound after the original sound is heard.
Feedback
Adjusts the proportion of the delay sound that is fed back into the effect. Negative (-) settings
will invert the phase.
HF Damp
200–8000 [Hz],
BYPASS (*1)
Adjusts the frequency above which sound fed back to the effect is filtered out. If you don’t want
to filter out any high frequencies, set this parameter to BYPASS.
Adjusts the pan position of Delay 1.
Adjusts the pan position of Delay 2.
Adjusts the pan position of Delay 3.
Adjusts the volume of Delay 1.
Adjusts the volume of Delay 2.
Adjusts the volume of delay 3.
1/64T, 1/64, 1/32T, 1/32, 1/16T, 1/32., 1/16, 1/8T, 1/16., 1/8, 1/4T, 1/8., 1/4, 1/2T, 1/4., 1/2, 1T, 1/2., 1, 2T, 1., 2
200, 250, 315, 400, 500, 630, 800, 1000, 1250, 1600, 2000, 2500, 3150, 4000, 5000, 6300, 8000 [Hz], BYPASS
To Next Page
Loading...
