Roland SP-540i - Installing the Ink Cartridges

3. Assembling and Installing
26
Removing the Packing Materials
Tape and packing materials are attached to the machine to protect it from vibration during transportation. When installation
is complete, remove these.
 Remove all packing materials. Any that remain may cause faulty operation or breakdown when the
power is switched on.
 Store the packing materials carefully, because they are needed again when transporting the machine
for relocation or the like.
Remove the packing.
Remove the retainer and remove the packing.
Remove the packing.
Remove the packing.
Packing
You can attach the removed packing material at the location shown in the gure for storage.
Tape
Tape
Packing
Packing
Packing
Retainer