Roland SP-540i - 4 Connect the Cables; Connecting the Cables

27
4. Connect the Cables
Connecting the Cables
WARNING
Connect to electrical outlet that complies with this machine's ratings (for voltage,
frequency, and current).
Incorrect voltage or insufcient current may cause re or electrical shock.
WARNING
Connect to ground.
This can prevent re or electrical shock due to current leakage in the event of
malfunction.
WARNING
Perform this task with all power switches left switched off.
Otherwise sudden movement of the machine may cause injury.
Power cable
Ethernet cable (Category 5 or higher)
Electrical outlet
Ethernet (100Base-TX recommended)
Never insert a tele-
phone cable.