Roland SP-540i - Installing the Blade

5. Installing the Ink Cartridges
31

Pull out the dummy cartridges from slots 3 and 4.
Press
.

Insert the SOL INK cleaning cartridge into slots 3 and 4.
Insert rmly until you hear a beep.

Insert the dummy cartridges into slots 1 and 2.
Press
.

Pull out the SOL INK cleaning cartridges from slots 3 and 4.
REMOVE DUMMY CRT.
SLOT: 3, 4
SET SOL CL-LIQUID
3 4
SET DUMMY CRT.
SLOT: 1, 2
FILLING INK...
＞＞＞
REMOVE SOL CL
3 4
FILLING INK...
＞＞＞
Orient with the round
hole facing up
Dummy cartridge
Slowly insert all the way.