Roland Texart RT-640 - Making Sure to Verify the Setting for the Amount Remaining Every Time the Media Is Changed; Printing the Amount of Remaining Media

Printing Operation Management
5
To Administrators
104
Making Sure to Verify the Setting for the Amount Remaining Every Time the Media Is Changed
Set the machine to display
5'6.'0)6*
OO
every time media is changed.
Procedure

Press .

Press to display the screen on the left.
Press
.

Press twice.
Press
.

Press or to select "ENABLE."
Press
to conrm.
If you set to “ENABLE,” you must set the [SHEET TYPE] menu to
“OPAQUE.”
 P. 92"Using Transparent Media"

Press to go back to the original screen.
Description
Setting this menu to “ENABLE” can keep you from forgetting to redo the setting when you change the media.
When doing so, the [SHEET TYPE] menu item must be set to "OPAQUE" (
P. 92"Using Transparent Media").
When [SHEET TYPE] is set to "CLEAR," [SHEET REMAIN] is not displayed automatically.
Default setting
[AUTO DISPLAY]: DISABLE
Printing the Amount of Remaining Media
This prints the amount of media remaining that is displayed at the top menu.
Procedure

Press .

Press to display the screen on the left.
Press
.

Press .
Printing starts.

Press to go back to the original screen.
/'07
5*''64'/#+0
5*''64'/#+0
#761&+52.#;
#761&+52.#;
&+5#$.''0#$.'
/'07
5*''64'/#+0
5*''64'/#+0
24+06/'/1