Roland Texart RT-640 - Printing Area; Maximum Printing Area and Margins

128
7
Main Specication
Printing Area
Maximum Printing Area and Margins
A: Setting of the [SIDE MARGIN] menu item (5 mm, 10 mm (default setting), or 25 mm)
B: Width clamped by the media clamp (approx. 5 mm)
*1 The width of the left and right margins is the total of A and B. In the following cases, however, the setting
for A itself becomes the width of the margin.
 •Whenmediahasbeenloadedwithoutinstallingthemediaclamps
 •Whenthe[SHEETTYPE]menuitemissetto[CLEAR](regardlessofwhetherthemediaclampsarepresent)
*2Thewidthoftherightmargincanbechangedbymakingthesettingofbasepoint(printing-startlocation).

P. 44"Setting the Printing-start Location"
B
B
A
A
90 mm
Maximum
printing area
75 mm
Maximum 200,000 mm
(7,874 in.)
Origin of printing coordinates
Maximum 1615 mm (63.6 in.)
Media
Trailing edge of media
Leading edge of media
Right margin (*1)(*2)Left margin (*1)
Media clamps Media clamps