Roland Texart RT-640 - Maximum Printing Area When Using Crop Marks; The Media-Cutoff Location During Continuous Printing

Printing Area
7
Main Specication
129
Maximum Printing Area When Using Crop Marks
Themaximumprintingareawhencropmarksareusedisreducedfromthemaximumprintingareawhencrop
marksarenotusedbyanamountequaltothecropmarks.
The Media-cutoff Location During Continuous Printing
Whenamedia-cutocommandissentfromthecomputer,thecutolocationonthemediaisasshownin
thegurebelow.
10 mm
12.5 mm
10 mm
12.5 mm
12.5 mm
10 mm
12.5 mm
10 mm
Printing area
Crop mark
Maximum
printing area
Location where separated
75 mm
Margin (Software RIP
setting value)
Second page
First page