Switch On!
Switch On!
Procedure
Close the front cover.
Switch on the main power.
Switch on the sub power.
Sleep Mode (Power-saving Feature)
This machine is provided with a power-saving feature that switches to a low-power “sleep mode” when a xed
interval passes with no operation. The factory default for the time after which the machine switches to the
sleep mode is 30 minutes. When the machine is in the sleep mode, the sub power switch ashes slowly. Using
the operation panel or sending printing data from the computer restores the machine to its normal mode.
This setting of sleep mode can be changed. However, we recommend setting the activation time for the
sleep mode to 30 minutes or less to reduce power consumption and prevent problems such as overheating, .
P. 106"Setting Activation Interval for Sleep Mode (Power-saving Feature)"
Main power switch
Sub power switch
Front cover
To Next Page
Loading...
