47
Getting Ready to Receive Data from a Computer
P. 18"Loading Media" and P. 39"Setup of Media" are completed, get the machine ready to receive the data
from a computer.
CAUTION
Never touch the print head carriage while printing is in progress.
The print head carriage moves at high speed. Contact may cause injury.
Procedure
Close the front cover.
Make sure stays steadily lit.
If the light does not come on, lower the loading lever.
Make sure the top menu is displayed.
If the top menu is not displayed, press
several times.
W1200mm
Printing is not possible in these situations
The machine does not run when the cover is open.
Printing is interrupted when the front cover is opened during printing. Do not open it when
printing is in progress.
Data from the computer is not accepted when
is dark.
Data from the computer is not accepted when you are not at the top menu.
Top menu
Steadily lit
To Next Page
Loading...
