Roland Texart RT-640 - Pausing or Canceling Printing; Cutting off the Media

Printing
2
Basic Operation
49
Pausing or Canceling Printing
You can pause and cancel printing before it nishes. We do not recommend resuming printing because hori-
zontal bands are produced at the place where printing was paused.
Procedure

Press during printing.
Printing operation is paused.
Press again to resume printing.
To cancel printing, go the next procedure without pressing at this stage.

When the screen on the left is displayed, hold down
for at least 1 second.
Printing operation is canceled.

Stop sending printing data from the computer
Cutting Off the Media
Procedure

Remove the left and right media clamps.

Close the front cover.

Make sure stays steadily lit.

Press .
61%#0%'.*1.&
&1902#75'-';