72
3.
Finish refreshing the subtanks.
Install all ink pouches in the ink pouch
holders.
Install the new ink pouches, taking care to use the
right color.
Raise the stopper.
Take care not to crush ink pouches.
Press .
Raise all the ink pouch holders.
Raise the ink pouch holder slowly without letting
go of it.
Press .
When the screen on the left is displayed, remove the drain
bottle and discard the discharged uid.
Press .
When it nishes, the screen shown on the left appears again.
Press to go back to the original screen.
When installing an ink pouch and returning the
ink pouch holder to its original position, raise the
ink holder rmly until it clicks into place. Ink will
leak if the ink pouch holder is not returned to the
correct position.
To Next Page
Loading...
