6
Part Names and Functions
This Machine
Front
Back
Front cover
Leave closed except when load-
ing media etc.
Ink pouch holder
This is where ink pouches are
installed.
Right cover
You remove this
when you perform
maintenance.
Operation Panel
P. 8"Operation Panel"
Drain bottle
Loading lever (front side)
You operate this when you
load media.
Left cover
You remove this when
you perform mainte-
nance.
Feed adjuster (front side)
Subtank slots
This is where subtank car-
tridges are installed.
Main power switch
Power-cord
connector
Ethernet connector
This is used to connect the machine to a network.
Status LED
This indicates the status
of the machine’s net-
work feature. It lights
up green when status
is normal.
Activity LED
This flashes yellow while data is
being received from the network.
Connector
This is employed when
you’re using the media
take-up system avail-
able separately.
Loading lever (rear side)
You operate this when you
load media.
Media holder
Shaft
Feed adjuster (rear side)
To Next Page
Loading...
