Roland Texart RT-640 - Loading a Saved Preset

Fully Utilizing the Preset Function
4
Advanced Functions
87
[ADJUST BI-DIR SIMPLE SETTING]

P. 88"Correcting for Misalignment in Bidirectional
Printing"
[ADJUST BI-DIR DETAIL SETTING]

P. 89"Correcting for Misalignment in Bidirectional
Printing More Precisely"
[CALIBRATION]
 P. 89"Alleviating Horizontal Bands (Feed Correc-
tion Function)"
[SHEET TYPE], [SHEET WIDTH], [SHEET POS.]

P. 92"Using Transparent Media"
[SCAN INTERVAL]
 P. 94"Using Hard-to-dry Media"
[VACUUM POWER]
 P. 94"Using Media that does not Move Smoothly"
[FULL WIDTHS]

P. 95"Changing the Range of Print-head Carriage
Movement"
[SIDE MARGIN]

P. 96"Expanding the Printing Area by Reducing
the Margins"
[MEDIA RELEASE]
 P. 98"Using Sticky Media"
 P. 87"Loading a Saved Preset"
Loading a Saved Preset
Procedure

Press .

Press to display the screen on the left.
Press
twice.

Press or to select the name of the preset
you want to load.
Press
to conrm.
The settings are changed and the screen shown on the left appears.
Description
This loads a saved preset. You can select any one of eight types of presets. (When no names have been assigned,
you select from among NAME1 through NAME8.) If you load a preset while
is steadily lit,
starts ashing. After that, when the setup operation is complete,
returns to a steadily lit state.
/'07
24'5'6
.1#&
0#/'
5'6725*''6