92
Using Transparent Media
1.
Set media type to "CLEAR."
Raise the loading lever.
Press .
Press several times to display the screen shown
at left.
Press
twice.
Press or to select "CLEAR."
Press
to conrm.
2.
Set the media width.
Press , then .
Press .
Press or to enter the width of the media.
Press
to conrm.
Press to go back to the original screen.
3.
Load transparent media on the machine.
Refer to P. 18"Loading Media", and load the media on the machine.
4.
Set the position of the right edge of the media.
Press .
Press several times to display the screen shown
at left.
Press
.
Press twice.
Press
.
To Next Page
Loading...
