Roland Texart XT-640 - Step 7: Installing the Ink System; Step 8: Connecting the Cables and Making Initial Settings

4. Assembly and Ink Filling
25
Step 7: Installing the Ink System
About this procedure
This procedure must be performed by a suitably qualied service technician. Never attempt to perform this
procedure yourself.
CAUTION
Leave this work to a suitably qualied worker.
This procedure includes work near sources of electrical danger and complex
assembly work. Incorrect work may result in injury and mechanical malfunction.
Items used in this procedure
Roland Ink System
1 set
Printer unit included items
Tube caps
Cleaning sticks
Step 8: Connecting the Cables and Making Initial Settings
1. Connect the cables.

Insert the cable clamp.
Cable clamp