Roland TR-626 - Page 37

Basic Operation
The Display gives the pattern group and number chosen ..
Step 7 Push the Enter Key.
ACCENT
push D
ENTER
The designated rhythm pattern is written into the 1st bar. The bar
in the Display changes to 2.
Repeat steps 6 and 7 for every bar you want to write.
To play the track that has just been written follow the instructions
found in "b. Track playing" on page 41.
* There are 999 bars that can written in the 6 tracks. When the
following message appears while writing tracks all 999 bars have been
used. In order to write more new bars, it is necessary to erase some
of the old ones.
C' ''
' ,_, ,_
* In track playing, one track is played repeatedly. If you want the track
to end after playing once, you must write several empty bars after the
final bar. Then, while the empty bars are being played, push the Start
/Stop Key.
37