Roland TR-6S - Editing an Instruments Sound (INST Edit); Selecting an Instruments Tone; Searching for Instrument Tones; Editing an Instruments Tone Parameters

24
Editing a Kit’s Settings (KIT Edit)
How to enter characters
1. Use the [VALUE] knob to select “NAME.”
2. Press the [VALUE] knob to access the character
input screen.
Controller Explanation
[VALUE] knob
Change the character.
[UTILITY] button
Moves to the right.
[COPY] button
Moves to the left.
[SHIFT] button
+ [COPY] button
Deletes one character
(Erase) .
[SHIFT] button
+ [UTILITY] button
Inserts one character
(Insert) .
[SHIFT] button
+ [VALUE] knob
Switches between uppercase/lowercase/
numerals.
3. When you’ve finished inputting characters, press
the [VALUE] knob.
Saving the Pattern, Kit, or System Settings (WRITE)
Here’s how to save a pattern or kit.
1. Hold down the [SHIFT] button and press the [EXIT]
button.
The WRITE screen appears.
2. Use the [VALUE] knob to select what you want to
save, and press the [VALUE] knob.
The WRITE screens appear in the order of “Overwrite”
0
“Pattern”
0
“Kit”
0
“System.”
* If “System” is selected, a confirmation screen appears. Proceed to step 4.
* “Overwrite” saves the pattern and kit simultaneously. Proceed to step 4.
3. Use the [VALUE] knob to select the save-
destination, and press the [VALUE] knob.
A confirmation message appears.
4. Use the [VALUE] knob to select “O K ,” and press the
[VALUE] knob.
If you decide to cancel, use the [VALUE] knob to select “Cancel,” and
then press the [VALUE] knob.
Shortcuts for save operations
Operation Operating the Unit
Save a pattern
(PATTERN WRITE screen)
Hold down the [EXIT] button and press
the [PTN SELECT] button.
Save a kit
(KIT WRITE screen)
Hold down the [EXIT] button and press
the [KIT] button.