Roland TrueVIS SG2-540 - Measures When the Printer Is Not in Use for a Prolonged Period

Measures When the Printer Is Not in Use for a Prolonged Period
Be sure to follow the instrucons shown below when the printer is not in use for a prolonged period.
• Empty the drain bole.
If you know that you will not use the machine for a prolonged period, empty the drain bole. When the main
power is on, the machine periodically performs automac maintenance in which uid is discharged.
The drain bole is lled when the following periods elapse. Leaving the drain bole as-is will lead to the dis-
charged uid overowing.
• Approximately 2 weeks aer the message "EMPTY DRAIN BOTTLE" is displayed
P. 12「If the Discharged Fluid Disposal Message Appears」
• Approximately 150 days aer the drain bole is emped
P. 13「If the Drain Bole Exceeds Its Capacity Limit」
• Do not empty the ink or cleaning liquid.
Periodically performed automac maintenance discharges ink and cleaning liquid. Install a cleaning liquid
pouch and ink pouches with a sucient amount remaining. If ink or cleaning liquid is empty, automac main-
tenance becomes impossible.
• Switch on the sub power once a month.
Switch on the sub power once a month. When you turn on the power, the machine automacally performs
operaons such as those to keep the print heads from drying out. Leaving the machine unused for a prolonged
period may damage the print heads, so be sure to switch on the power to perform these automac opera-
ons.
• Keep the machine at a constant temperature and relave humidity.
Even when the machine is not in use, keep it at a temperature of 5 to 40°C (41 to 104°F) and a relave humidi-
ty of 20 to 80% (with no condensaon). Temperatures that are too high may degrade the ink and cause mal-
funcons. Temperatures that are too low may cause the ink to freeze and damage the print heads.
Basic Maintenance Knowledge
1. Introduction 7