Never use the platen or dryer for any purpose for which they are not intended, such as to dry
clothing.
Doing so may cause overheating, resulting in fire or accident.
WARNING
Use the machine in an environment with an ambient temperature of 20 to 32°C (68 to 90°F).
If the machine is used at an ambient temperature lower than 20°C (68°F), then depending on the type or width of the
media, wrinkling or temperature-caused unevenness may occur. If this happens, try lowering the temperature of the
media heating system by about 2°C. To obtain stable printing results, however, use the machine in an environment with
an ambient temperature of 20°C to 32°C (68°F to 89.6°F).
IMPORTANT
Adjusting the Ink-drying Method
Optimizing the Output Quality 163
To Next Page
Loading...
