No. Name Details
[Cleaning]/[Nozzle Drop-out Test]
Displays the menu related to the printing test and clean-
ing for the nozzle drop-out check.
[Blade Adjustment]
Sets cutting conditions. This is only enabled when media
is loaded.
[Move]
Feeds the media and moves the carriage. You can also set
the position moved to as the right edge of the output
area (the base point).
P. 203Adjusting the Output-start Loca-
tion
[Sheet Cutting]
Activates the separating knife to separate the media. You
can also perforate the media to take it up and separate it
at a later time.
Part Names and Functions
16 Basic Information
To Next Page
Loading...
