Showing/Hiding Notifications
Use the following procedure to show/hide the following notifications, which prompt operators to perform
proper operations.
Procedure
1. Tap
.
2. Tap [Preferences]>[Notifications On/Off].
3.
Tap
to show/hide the notifications.
Displayed notification Description
[Ink Mixing Notification] [The time for ink mixing has arrived.] Prompts you to mix the ink in the ink
pouch tray to prevent ink precipitation.
When enabled, a message recommend-
ing mixing the ink is displayed once a
week.
[Middle Pinch Roller Placement Notifi-
cation]
[Place the middle pinch rollers over
all the grit rollers.]
Prompts you to use the middle pinch
rollers, improving media feeding accu-
racy and preventing the media from
coming loose. When enabled, this mes-
sage appears when the middle pinch
rollers have not been placed.
[Media Clamp Placement Notification] [Install the media clamps correctly.] Prompts you to correctly place the me-
dia clamps to prevent the media from
coming loose. When enabled, this mes-
sage appears when the media clamps
are not placed at the edges of the me-
dia.
[Media clamps could not be detect-
ed.]
This message appears when the media
clamps cannot be detected because
they are hidden by the media or are
dirty with, for example, ink.
4. Tap [Save] to confirm your entry.
5.
Tap to go back to the original screen.
Managing the Operations Appropriately and Efficiently
212 Optimizing Operation Management
To Next Page
Loading...
