Roland TrueVIS SG3-540 - Setting the Activation Interval for Sleep Mode (Power-Saving Feature)

Setting the Activation Interval for Sleep Mode (Power-saving Feature)
This setting is used to set how long it should take until the machine goes into sleep mode (the state in
which the power-saving feature is working) when no output data is received and no operations are per-
formed for a continued length of time.
Procedure
1. Tap
.
2. Tap [Preferences]>[Sleep Time].
3.
Tap
or to set the time.
4. Tap [Save] to confirm your entry.
5. Tap to go back to the original screen.
• Default setting: [
30 min.]
MEMO
Managing the Operations Appropriately and Efficiently
Optimizing Operation Management 213