The procedure is displayed on the operation panel.
• Tap or to check the procedure.
• If you complete the work without viewing the instructions, tap [Finish All].
MEMO
The print heads move to the left end of the machine.
5. Open the right cover.
6. Touch the location shown in the figure to discharge any static electricity.
7. Moisten the cleaning stick with the cleaning liquid.
Be sure to use one of the included cleaning sticks.
IMPORTANT
8. Clean the locations shown in the following figure.
Be especially careful to clean away any fibrous dust (lint).
Cleaning around the Print Heads
Regular Maintenance 233
To Next Page
Loading...
