Is some other object coming into contact with the media?
Make sure the media does not touch anything else. This may affect output, even when the feed appears to
be smooth.
RELATED LINKS
・ P. 30 Setup of New Media
・ P. 67 Setup of Registered Media
Is the media too thick?
Media that is too thick may not only cause an unstable feed but may scrape the print heads, resulting in a
malfunction. Never use such media.
Are the grit rollers dirty?
Check to make sure the grit rollers are free of buildup of foreign material such as media scraps.
RELATED LINKS
・ P. 229 Cleaning the Machine
Media Feeding Is Not Smooth
290 Media Feed Problems
To Next Page
Loading...
