Roland TrueVIS SG3-540 - Printing;Cutting Area; Maximum Area

Maximum Area
The printing or cutting area along the horizontal plane (the direction in which the carriages move) is de-
termined by the position of the pinch rollers.
A
B
C
D
E
F
A
B
C
Pinch roller
Printing or cutting area
Printing or cutting coordinates origin (0,0)
A 75 mm (3 in.)
B 10 mm (0.4 in.)
C 1.5 mm (0.06 in.)
D Max. 24,998 mm (984.2 in.)
E 54-inch model: Max. 1,346 mm (52.9 in.), 30-inch model: Max. 737 mm (29 in.)
F 105 mm (4.13 in.)
Printing/Cutting Area
322 Main Specifications