Roland TrueVIS VG-640 - Step 8: Ink Filling

3. Assembly and Ink Filling
19
Step 8 : Ink Filling
IMPORTANT
First use cleaning liquid to clean the print heads, and then ll the printer with each color of ink.
• Be sure to use new TR cleaning liquid pouches and ink pouches.
• Never, under any circumstances, use anything other than the specied type of ink or cleaning liquid.
• TR cleaning liquid pouches (2) that are included with the machine is used on P. 20, "2. Clean the print
heads using TR cleaning liquid."
• TR cleaning liquid pouch to be used on P. 24, "4. Fill the machine with TR cleaning liquid." is needed to
be purchased separately. Purchase them from your authorized Roland DG Corp. dealer.
Items used in this procedure
Included Items TR cleaning liquid pouches (2)
Items separately purchased Ink pouches (each color), TR cleaning liquid pouches (1)
1. Select the ink type.
A
Press [ ] or [ ] to select the ink type, and then press [ENTER].
SELECT INK TYPE
TrueVIS 7C
SELECT INK TYPE
TrueVIS 4C
Select Ink Type
Cyan (C)
Magenta (M)
Yellow (Y)
Black (K)
Light Cyan (Lc)
Light Magenta (Lm)
Light Black (Lk)
TrueVIS 7C
 
TrueVIS 4C

B
Press [ ] or [ ] to select [YES], and then press [ENTER].
TrueVIS 7C
[YES] NO
TrueVIS 4C
[YES] NO
If the ink type is incorrect, select [NO], press [ENTER], and redo the procedure
A
.
C
Make sure the drain bottle is installed, and then press [ENTER].
 P. 13, "Step 3 : Installing the Drain Bottle"
INSTALL
DRAIN BOTTLE