Roland TrueVIS VG-640 - Drying the Trailing Edge of the Printing Area on the Dryer

Settings for the Media Heating System
4
Advanced Functions
120
E
Press [ ] or [ ] to select a setting.
• MENU: The system performs heating to the set temperature at all times, without
lowering the temperature during preheating.
• 30°C: The system maintains a temperature of 30°C (86°F) during preheating.
• OFF: The system switches the media heating system off during preheating.
PREHEATING
30゜C MENU
F
Press [ENTER] to conrm your entry.
G
Press [MENU] to go back to the original screen.
Default Setting
[PREHEATING]: 30°C
Drying the Trailing Edge of the Printing Area on the Dryer
Procedure
A
Press [MENU].
B
Press [ ] several times to display the screen shown below.
MENU
HEATER MENU
C
Press [ ] twice to display the screen shown below.
FEED FOR DRY
DISABLE DISABLE
D
Press [ ] or [ ] to select "ENABLE."
FEED FOR DRY
DISABLE ENABLE
E
Press [ENTER] to conrm your entry.
F
Press [MENU] to go back to the original screen.