Roland TrueVIS VG-640 - Using a Blower-Fan Unit

Settings for the Media Heating System
4
Advanced Functions
123
Using a Blower-fan Unit
Procedure
A
Press [MENU].
B
Press [ ] several times to display the screen shown below.
MENU
HEATER MENU
C
Press [ ] once, and then press [ ] several times to display the screen shown below.
HEATER MENU
BLOWER FAN
D
Press [ ] to display the screen shown below.
BLOWER FAN
DISABLE DISABLE
E
Press [ ] or [ ] to select "ENABLE."
BLOWER FAN
DISABLE ENABLE
F
Press [ENTER] to conrm your entry.
G
Press [MENU] to go back to the original screen.
Description
This switches the optional blower-fan unit "ENABLE" or "DISABLE". When using an blower-fan unit, select
"ENABLE". And you can speed up drying of the ink more. Contact your authorized Roland DG Corp. dealer
for recommended blower-fan unit models. For the details of how to use a blower-fan unit, refer to the
documentation for the blower-fan unit you are using.
Default Setting
[BLOWER FAN]: DISABLE