Roland TrueVIS VG-640 - Prioritizing the Cutting Settings of this Machine over the Software RIP Settings

Advanced Cutting Settings
4
Advanced Functions
142
Prioritizing the Cutting Settings of This Machine over the Software RIP Settings
Procedure
A
Press [MENU].
B
Press [ ] to display the screen shown below.
MENU
CUTTING MENU
C
Press [ ] once, and then press [ ] several times to display the screen shown below.
CUTTING MENU
CUTTING PRIOR
D
Press [ ] to display the screen shown below.
CUTTING PRIOR
COMMAND COMMAND
E
Press [ ] or [ ] to select "MENU."
CUTTING PRIOR
COMMAND MENU
F
Press [ENTER] to conrm your entry.
G
Press [MENU] to go back to the original screen.
Description
You can also make the settings for the cutting conditions in the software RIP. By default, the settings made
with the software RIP take priority. To make the cutting conditions set on the machine take priority, either
disable the software RIP settings or make the setting described above.
Default Setting
[CUTTING PRIOR]: COMMAND