Roland TrueVIS VG-640 - Printing Area; Maximum Area; Maximum Area When Using Crop Marks

192
7
Main Specications
Printing Area
Maximum Area
The printing or cutting area along the horizontal plane (the direction in which the carriages move) is determined
by the position of the pinch rollers.
Max. 24,998 mm (984.2 in.)
Max. 1,600 mm (63 in.)
90 mm
(3.6 in.)
75 mm
(3 in.)
Printing or cutting coordinates origin
Pinch roller
Printing or cutting area
75 mm
(3 in.)
10 mm
(0.4 in.)
1.5 mm
(0.06 in.)
10 mm
(0.4 in.)
1.5 mm
(0.06 in.)
Maximum Area When Using Crop Marks
When crop marks are used, the printing area is reduced from the maximum area by an amount equal to the
crop marks.
Crop Mark
Printing area
Maximum area
10 mm
(0.4 in.)
12.5 mm
(0.5 in.)
10 mm
(0.4 in.)
12.5 mm
(0.5 in.)
10 mm
(0.4 in.)
12.5 mm
(0.5 in.)
10 mm
(0.4 in.)
12.5 mm
(0.5 in.)