Roland TrueVIS VG2-540 - Step.2:.Make.the.network.settings.on.the.printer; Step 2: Make the Network Settings on the Printer

57
3. Network Settings
2.Installation
E
Select [Use the following IP address]. Enter the informaon as shown below, and then
click [OK].
Item Address to enter
IP address 192.168.0.XXX
Subnet mask 255.255.255.0
Here, "XXX" can be any number from 1 to 254. However, be sure to specify a number that is
dierent from the numbers used for other computers and devices.
F
Close this window to return to the original state.
Windows 10, 8.1
Click [OK] in the [Internet Protocol Version 4 (TCP/IPv4) Properes] dialog box, click
[Close] in the [Ethernet Properes] dialog box, and then click [Close] in the [Ethernet
Status] dialog box.
Windows 7
Click [OK] in the [Internet Protocol Version 4 (TCP/IPv4) Properes] dialog box, click
[Close] in the [Local Area Connecon Properes] dialog box, and then click [Close] in
the [Local Area Connecon Status] dialog box.
Step 2: Make the Network Settings on the Printer
1.
Set the IP address.
A
Press [MENU].
B
Press [ ] several mes to display the screen shown below.
MENU
SYSTEM INFO.