Roland TrueVIS VG2-540 - Page 26

Manual Cleaning
24
2.Regular Maintenance
1.
Cleantheprintheadcaps.
Procedure
A
Removeanymedia.
B
Press[FUNCTION].
C
Press[ ]once,andthenpress[ ]severalmestodisplaythescreenshownbelow.
CLEANING
MANUAL CL.
D
Press[ENTER].
Aer "NOW PROCESSING.." is displayed, the screen shown below appears.
Also, the print head moves to the le end of the platen.
FINISHED?
IMPORTANT
Do not press the [ENTER] key at this stage. Press the [ENTER] key aer cleaning is complete. If you
press the [ENTER] key at this stage, wait for the screen to change as shown in the following gure,
and then press the [ENTER] key again.
CLEANING...
>> 01:45
CLEANING
MANUAL CL.
E
Opentherightcover.