Step 2: Normal Cleaning Method
Procedure
1. Check for the group with dot drop-out or dot displacement by viewing the results of the printing test.
The space from "A" to "B" is group A. The space from "B" to the right side is group B.
If the printing-test results are difficult to interpret
Check the results in a bright location, changing your line of vision. They are visible using the reflection of the
light.
MEMO
2. Tap [Cleaning].
3. Tap [Normal Cleaning].
The screen shown below appears.
4. Select the group of print heads to clean.
5. Tap [Execute].
Cleaning will start. The status is displayed as [Normal cleaning in progress.] at the top of the op-
eration panel.
On completion, you will return to the original screen.
6. Perform a printing test again.
Preparations for Printing Output
Printing Method 119
To Next Page
Loading...
