7. Close the front cover.
8. Tap [OK].
The print heads move to their original position.
9. Tap to go back to the original screen.
• Default setting: [Low]
• If degradation of printing quality occurs after raising the print head height, refer to the following informa-
tion and try optimizing the quality.
MEMO
RELATED LINKS
・ P. 152 Automatically Making Required Adjustments
・ P. 155 Manual Adjustment: Adjusting the Misalignment of the Ink Landing Position (Media Gap Adjust-
ment)
・ P. 164 Preventing Soiling of the Media, Dot Drop-out, and Dot Displacement
Configuring Settings to Match the Properties of the Media
158 Optimizing the Output Quality
To Next Page
Loading...
