Setting the Dryer Temperature
Setting the temperature of the dryer appropriately makes the ink dry fast.
• With the default settings, simply switching on the power does not make the dryer warm up to the set
temperature. On completion of media setup, the temperature rises to the set value.
• Depending on the usage environment, the temperature of the dryer may become higher than the set
temperature, but this does not represent a problem.
• Temperature settings are not possible when [Heater Power] accessed from [Media Settings]>[Heater
Settings]>[Heater Temperature] is off.
Procedure
1. Load the media.
2. Tap the following location on the home screen.
The [Heater Temperature] screen appears.
3. Check that the [Heater Power] check box is selected.
4.
Tap or to set the [Dryer] temperature.
When ink drying is poor, set the temperature to a higher value. Note, however, that a temperature
that is too high may degrade the media or cause it to wrinkle.
Adjusting the Ink-drying Method
170 Optimizing the Output Quality
To Next Page
Loading...
