Setting the Temperature during Standby
Standby: State in which the main power and the sub power are switched on and the media setup is not
complete.
Procedure
1. Tap
.
2. Tap [Preferences]>[Standby Heater Temperature].
3.
Tap
or to set the temperature.
When this is set to
(off), the media heating system is switched off during standby.
4. Tap [Save] to confirm your entry.
5. Tap to go back to the original screen.
• Default setting: 30°C
MEMO
Adjusting the Ink-drying Method
Optimizing the Output Quality 173
To Next Page
Loading...
