Checking the Remaining Media
You can display how much of the media in use is left. By setting the amount of media currently remaining
at the start, the amount remaining will be constantly displayed on the screen until it reaches zero.
Because the amount of media remaining is not updated automatically when you change the media, redo
the setting whenever you change the media.
The remaining amount that is displayed is only an estimate. Accuracy is not assured.
MEMO
Procedure
1. Load the media.
2. Tap the following location on the home screen.
The [Remaining Media Management] screen appears.
3. Tap or to enter the length of the remaining media.
4. Tap [Save] to confirm your entry.
5. Tap to go back to the original screen.
The remaining media is displayed.
Managing the Operations Appropriately and Efficiently
Optimizing Operation Management 215
To Next Page
Loading...
