Printing the Amount of Remaining Media
Print the amount of remaining media, which is displayed on the home screen.
Use this when you want to make a record of the remaining length of the media currently in use. Printing
the amount of media remaining before you change the media enables you to refer to the printed record
and use the value to make the setting for the remaining amount the next time you use the media.
Note, however, that if you continue printing, the next printing operation will start on top of the portion
where the amount of remaining media is printed. If you want to continue printing, separate the media be-
fore starting the next printing operation.
Procedure
1. Check that the amount of remaining media is displayed on the home screen.
If it is not, set the amount of remaining media by referring to Checking the Remaining Media(P.
215).
2. Tap the following location on the home screen.
The [Remaining Media Management] screen appears.
3. Tap [Printing Remaining Media Amount]>[Execute].
The amount of remaining media is printed.
Managing the Operations Appropriately and Efficiently
216 Optimizing Operation Management
To Next Page
Loading...
