Cleaning the Knife Carriage Roller
Paper dust affixes to the separating knife carriage roller during media separation. Periodically wipe the
area clean.
Never use a solvent such as gasoline, alcohol, or thinner to perform cleaning.
Doing so may cause a fire.
WARNING
Before attempting cleaning, switch off the sub power and wait until the platen and dryer cool
(approximately 30 minutes).
Sudden movement of the machine may cause injury, or hot components may cause burns.
CAUTION
• This machine is a precision device and is sensitive to dust and dirt. Perform cleaning on a daily basis.
• Never attempt to oil or lubricate the machine.
Clean by wiping with a cloth moistened by neutral detergent diluted with water then wrung dry.
IMPORTANT
Cleaning the Machine
Regular Maintenance 235
To Next Page
Loading...
